Display Poles and Accessories:

Gomberg Kites offers the complete line of banner and windsock display systems. These are not fishing poles with a "sensitive" (ie. flimsy) tip that will break off in the wind or puncture your banner. Our award winning poles were specifically designed for display and banner applications.

Pieces Shown Below:
Modular Poles: Ultra 10 / Ultra 16 / Extension Sections
Telescopic Poles: Heavy Duty 16 and 28 foot Poles
Anchors: Fiberglass Anchor Stakes / Plastic Ground Base / Anchor Spikes
Mounting: Floor Stands / Deck Mounts / Tire Base
Banners and Windsocks: Banners Pole Sleeves
Place an Order

When selecting a display system, you should first consider what you want to do with it. Some poles are designed for convenience and portability. Some are designed for durable long-term commercial displays. Stronger poles are heavier and more expensive than lighter ones. And of course, we have a selection to meet any of these conditions and applications.

  • Modular Poles: Modular poles contain multiple independent section that connect externally. They are heavier and more durable than telescopic poles. More important, they cannot collapse. But they also take slightly more time to assemble. ("Slightly" in this case, means two minutes instead of one minute.)
  • Tellescopic Poles: Generally speaking, telescopic poles are more convenient for traveling exhibitions. They are lighter and extend quickly. But they have extra parts (end caps and plugs), and sometimes the sections will collapse. Taping the transition will eliminate this problem but that reduces the ease of installation.
  • Anchor Stakes: Use a proper anchor. Rebar anchors will weaken or damage the inside of fiberglass poles. Fiberglass anchor stakes are clean, lightweight, and minimize pole damage.

The 16.5 foot tall Ultra 16 modular fiberglass pole is designed for long-term display and commercial applications.

The "Ultra 16" is a heavy-duty commercial banner pole featuring our exclusive modular stacking assembly. This pole cannot collapse even during extended use and there are no pesky caps and plugs to keep track of! Each section is numbered for fool proof assembly. Use our fiberglass anchor stakes, metal anchor spike, or mounting hardware.

  • Assembles to 16.5 Feet
  • Compact Storage of 44.5 Inches
  • Modular Assembly
  • Heavy Duty Construction
  • Cannot Collapse
  • Optional Extension Available
  • Storage Bag Included
  • No Top and Bottom Caps
  • Total Weight - 5 pounds
  • Classic Black Finish
  • $75 Retail
  • $84 with Anchor Stake
Add an optional extension section to stretch the Ultra 16 to 20 feet! Stinger Extensions are $15.


Five Modular Sections

Reinforced Base

Delux Bag

*Click here for information on how to place an order.

Make your Ultra 16 even longer with a 42 inch extension section. Add as many as you wish. $15 each.

The 10 foot tall Ultra 10 modular fiberglass pole is designed for ten foot banners.

This is a dependable three-section pole with a hard rubber base and no-puncture tip. The "Ultra 10" features our exclusive modular stacking assembly. This pole cannot collapse even during extended use and there are no pesky caps and plugs to keep track of! A zippered carry bag is included. Use our fiberglass anchor stakes, metal anchor spike, or mounting hardware.

  • Assembles to 10 Feet
  • Compact Storage of 44.5 Inches
  • Modular Assembly
  • Cannot Collapse
  • Storage Bag Included
  • Total Weight - 3 pounds
  • Classic Black Finish
  • $50 Retail
  • $59 with Anchor Stake


Three Modular Sections

Hard Rubber Base

Delux Bag

*Click here for information on how to place an order.

8 ft Feather Banners:

The perfect way to add color or draw attention.

Feather Flags are specially designed from ripstop nylon to minimize color fading and wear or fraying. The lightweight fabric stays open and on display even in no wind.

We’ve designed the feather with a closed top end so it won’t come loose and slide down a pole. Secure the Feather to your pole using the elastic bungee at the bottom.

BFeather Banners

Choose the colorful Rainbow for $40. Economical Basic banners are one solid color for just $30. They come in red, orange, yellow, green, blue, or purple. Or advertise your store, garage sale, or event with our Open banners which come in rainbow, warm, or cool for $40.

Feathers are designed for use with our Ultra 10 banner pole. Alternatively, they work well with inexpensive PVC pipe for a pole and rebar stakes for an anchor. (Purchase separately.) Click here for assembly instructions.

*Click here for information on how to place an order.

GKPI Poles and Accessories

  • 10 ft Ultra Modular Pole -- $50.00
  • 16 ft Ultra Modular Pole & stake -- $75.00
  • 3.5 ft Ultra Extension Section -- $15.00
  • Solid Fiberglass Stake -- $9.00
  • 16.5 ft Telescopic Pole & stake -- $44.00
  • 28 ft Telescopic Pole & stake -- $69.00
  • Solid Fiberglass Stake -- $9.00
  • Plastic Ground Base -- $3.00

*Click here for information on how to place an order.

Heavy Duty Telescopic Pole GKPI Also stocks a thick-walled, telescopic poles in 16 and 28 foot lengths. If you need to display windsocks, or put a smaller kite on static display, this is the tool to use. And they still collapses to 45 inches. Priced at $35 and $60 retail plus $9 for an anchor stake.

The heavy duty pole has a wider, 2 inch base, multiple extending sections, and a flat black matte finish. To extend the pole, simply remove the end cap and tilt the pole down so all the sections slide out.

  • Compact Storage of 44.5 Inches
  • Two Brass Winder Clips
  • Top Ring for Easy Connections
  • Total Weight - Under 5 pounds
  • Black Matte Finish
  • Top Plug and Screw Base
  • Choose 16 or 28 Feet
  • $44 and $69 Retail
  • $9 Anchor Stake


Wide 2 Inch Base

Nine Tellescopic Sections

Two Brass Clips

*Click here for information on how to place an order.

Anchor Stakes: Many people use rebar to anchor their polees. And that's why their poles break. The metal edges rub the inside of the pole and weakens it. And the metal doesn't flex in the wind. The preferred way to anchor your poles is with lighter weight, flexible and clean fiberglass stakes.

Simply position the stake where you want to display your banner or pole. Tap the rod into the ground or sand until solid. This could be as little as 10 inches or as much as two feet. Slide the hollow pole base over the stake and down to the ground. Add an optional plastic ground base for more support.

The GKPI stake is a 42 inch solid 1/2 inch diameter fiberglass pole. Buy them separately for $9 each.

*Click here for information on how to place an order.

Ground Base: One problem with banner stakes is that the base of the pole rubs on the ground. This makes it difficult for the banner to turn in the wind. And the pole gets dirty. Over time, it will wear a rut in the dirt or sand.

Solution? Add a ground base over the stake. It lifts the banner off the dirt, and with a small connection point, the pole can turn easilty into the prevailing wind. A good investment at $3 each.

*Click here for information on how to place an order.

Anchor Spike: An alternative to the fiberglass Anchor Stake is the metal Anchor Spike. This is an attractive and well-engineered device that holds the Ultra 10 or 16.

Notice that the top of the spike stands above the pole anchor. That's the piece you hit with a hammer! The pole connection point stays safe and undamaged. A ball-bearing base allows banners to turn easily. $25 each.

*Click here for information on how to place an order.

Display Stand: Display a banner or pole indoors with this simple floor base. The 24" sections screw together into a cross stand and are desiged to hold either the Ultra 10 or 16.

A ball-bearing connector allows banners to turn easily. $25 each.

Water Pillow: For extra stability, add some weight on top of the Display Stand.

We supply a tough water pillow designed to slide over the banner anchor rod. For storage, it empties fast and folds down small and light. $25 each.

*Click here for information on how to place an order.


Deck Mounts: Affix a permanant banner mount to your deck or house. These tough stands hold the Untra 10 or 16 securely. Display a banner or pole indoors with this simple floor base. The 24" sections screw together into a cross stand and are designed to hold either the Ultra 10 or 16.

A ball-bearing connector allows banners to turn easily. $49 each.

Please specify whether you want the floor mount, or the wall mount.

*Click here for information on how to place an order.

Tire Mount: Tailgaiting? Take a banner along and make a statement. You don't need to pound an anchor into the parking lot. Just fold open this handy Tire Mount. Then drive over it to hold the stand in place.

Tire Mounts are designed to hold the Ultra 10 or 16. $25 each.

*Click here for information on how to place an order.

Pole Sleeeve: Why hang just one windsock from a pole when you can attach four or five??

Pole Sleeves are designed to work with banner poles. They have grommets placed along the fabric edge so you can display up to five decorations. Set up several poles and you get a managerie of color. 16 foot: $15 / 5 foot: $10 each.

*Click here for information on how to place an order.

*Place an Order

*Back to Gomberg Kite Productions International

BULLETEmail: Info@GombergKites.com

BULLET Phone: 541-996-3083 (8:30 am to 6 pm Pacific)